How to disassemble and install common rail injector? Common rail injector disassembly tool manufacturers to share it for you:

Common rail injector but many manufacturers of good heart, left it the basic machine can not operate normally. Common rail fuel injector disassembly method, first must be around the common rail fuel injector debris and dust to get rid of, of course, in this step must be before the engine disassembly, high pressure pipe disassembly after the common rail with a clean plug and plastic cap to cover it, to prevent other debris into the inside.

The return pipe in the common rail fuel injector must pay attention to its installation, to pull out the return pipe first, carefully pull out the plug of the electromagnetic valve, and then remove the pressing nut of the common rail fuel injector, the fuel injector to use special tools.

If the use of common rail injector when there is a problem, must will it wash clean fuel injector, then start test, test, of course, also should have corresponding procedures and steps, should be used when cleaning, specifications of the product conforms to the common rail injector, don't let the noise of diesel block too long so that will affect the normal use of common rail injector, suggest in the assembly work subcontracted must will clean hands, assembly work can proceed.

Common rail injector disassembly tool manufacturers welcome your calls!